The measuring line NIL-1000 is designed for calibration of current collectors NT-20, NT-1000 and magnetic inductors NIM-1000, in part, determining the current metrological characteristics and limits of permissible relative error of the calibration coefficient.
The design of the NIL-1000 allows you to place the current collector being measured inside the measuring line, the cover of the measuring line is tightly fixed to the housing, while a coaxial line is formed, the outer conductor of which crimps the current collector, and the central conductor passes through the inner hole.
The measuring line meets the requirements of state standards GOST R 51317.4.6-99, GOST 30805.22-2013 (CISPR 22:2006), GOST R 51319-99 and meets international standards RTCA / DO-160 section 20, MIL-STD-461, IEC/EN 61000-4-6, CS114, CS115, CS116.
The design of the measuring lines provides safety precautions when working with microwave radiation in accordance with the current federal sanitary regulations SanPiN 2.2.4/2.1.8.055, as well as safety requirements in accordance with GOST 12.3.019-80.
- Frequency range
- from 20 Hz to 1000 MHz
- Nominal impedance
- 50 Ohm
- Typical VSWR values
- 10 MHz
- 1.02
- 50 MHz
- 1.05
- 100 MHz
- 1.1
- 200 MHz
- 1.2
- 300 MHz
- 1.3
- 500 MHz
- 1.5
- 600 MHz
- 1.6
- 800 MHz
- 1.9
- 1000 MHz
- 2.0
- Connector
- N-type
- Operating temperature
- +5°C to +45°C
- Overall dimensions (L×W×H)
- 140×106×95 mm
- Weight
- 710 grams
- Availability
- In stock
- Delivery time
- 1 week
- Warranty
- 1 year
- Manufacturer
- NIPHRIT
- Measuring line
- Load matched, coaxial 50 ohms
- Connecting cable
- Passport
- Calibration procedure
- Protective case